Contracting Strategy of a Project
|
|
|
- Shon Bryant
- 9 years ago
- Views:
Transcription
1 Page : 1 of 8 KLM Technology January 2013 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama Johor Bahru Malaysia Karl Kolmetz KLM Technology 4
2 Page 2 of 8 Introduction Some Project Management definitions; 1. A temporary endeavor undertaken to create a unique product or service 2. An undertaking with an established starting point and defined objectives - the achievement of which signifies the conclusion of the project 3. The application of knowledge, skills, tools, and techniques to a broad range of activities in order to initiate, plan, execute, monitor and close down a project in a controlled manner There are several Contracting Strategies. The contracts include Lump Sum Turn Key (LSTK), Reimbursable Cost (RC), Modified Lump Sum (MLS), and Project Management Consultants / Coordination (PMC). There is no one size fits all, each one has its best application.
3 Page 3 of 8 Lump Sum Turn Key (LSTK) LSTK is the best model for large project (greater than USD million) with very well defined scopes. Typically you would do a Front End Engineering Design (FEED) Study to develop the scope and the Instruction or Invitation to Bidders (ITB). A FEED Study and ITB might take several months to develop. One should not allow the FEED Study Engineering Company to then bid on the LSTK project, as this builds in a conflict of interest in the FEED Study and ITB. The ITB is then send to the LSTK contractors to review and bid. This normally takes at least four weeks on a larger project. The LSTK Contractors will send information to the vendors to quote on the equipment, and they will use their data base of construction information to estimate the construction cost. The LSTK Contractor will then submit their bid to the Owner. Typical cost they will include is; Engineering 10-15% Equipment / Procurement 40-60% Construction 40-60% Contingency 10-15% Profit 10-15% Included in the Equipment and Construction is the Project Management associated cost which could be greater than 10%. Positives of LSTK 1. The owner can reduce the amount of Internal Company Project Management. You will pay for Internal Project Management, even if you choose not to hire Experienced Project Managers. You will pay the hidden cost of plant reliability, efficiency and project quality. Do not expect quality if you do not inspect for compliance. 2. The contractor assumes some of the risk of the Project. 3. The contractor has an incentive to finish the project before the schedule.
4 Page 4 of 8 Negatives of LSTK 1. There is the potential for the contractor to make 30% profit, which is the profit plus contingency if the project is managed well. 2. There is the potential for change orders, which have a 50% profit margin if the ITB is not properly written. 3. Typically LSTK contracts do not include Commissioning or Operational Cost (OPEX) such as catalyst, solvent and chemicals. 4. It is understood that the LSTK Contractor s Project Manager s goal is to maximize the profit of his current contract, and his bonus is directly linked to his company s profitability. Therefore the way to maximize profitably is to build as low cost as possible while meeting the contract specifications and company s project quality inspections. Reimbursable Cost (RC) Reimbursable Cost is a contract where all actual cost of the project are reimbursed to the contractor by the owner, typically at a fixed overhead cost. The fixed overhead cost can range from 5 to 15% based on the economic cycle. Reimbursable Cost include 1. Project Management 2. Engineering 3. Procurement 4. Construction 5. Commissioning and Operational Cost Positives of Reimbursable Cost 1. May be the best when there are many unknowns in the project. 2. Limits the profit margin of the Contractor.
5 Page 5 of 8 Negatives of the Reimbursable Cost 1. Schedule at risk - the longer the project the higher the profit of the contractor 2. Increased need for Internal Company Project Management 3. The contractor has an incentive to spend more, thereby raising his total profit. Modified Lump Sum (MLS) Modified Lump Sum is categorized by lump sum compensation to the Contractor for part of the scope of work, and reimbursable cost compensation for the remainder. Modified Lump Sum contracts are appropriate where certain portions of a job contain more risks than is suitable / acceptable for lump sum contracting. Positives 1. Best for project that have good ITB for some parts and poor ITB for other parts. 2. Contractor assumes part of the project risk for the Lump Sum Portion Negatives 1. Contractor may try to shift parts of the Lump Sum Scope to the Reimbursable Contract. 2. Increased need for Company Internal Project Management.
6 Page 6 of 8 Project Management Consultant / Coordination (PMC) Project Management Coordination is when an experienced third party Project Management Team is hired by the company to execute the project. A Project Management Team should be led by Senior Managers that have at least ten projects in their career. As mentioned previously the Contractor s Project Manager has numerous project in his career, and is paid by the Contractor, therefore he has the Contractor s best interest at heart. To create a team of people with limited project experience to work with the Contractor s Senior Project Manager will cost your company money and project quality. Most Major Corporations have internal Project Management Teams that move from Project to Projects to protect the Corporation s best interest. For a small company to hire a PMC is the best for a small project (less than USD million). The PMC can bid the Engineering, Procurement and Construction with the best contract strategy for the company. Positives of PMC 1. Best for Small Projects 2. Chooses the best contracting strategy for each part of the project. Negativities of PMC 1. You are only as good as the team you hire. It is like football you need some stars to win.
7 Page 7 of 8 Conclusions Consider the best contracting strategy for your project. No one size fits all. Also consider that you will pay for good or bad Project Management. If you hire Experienced Project Managers you will pay them a cost, with the increased benefits to your project. If you choose not to hire Experienced Project Managers you will also pay, but it will be the hidden cost of plant reliability, efficiency and project quality.
8 Page 8 of 8
Contracting Practices in Mega Projects
CEM 520 Term Paper Contracting Practices in Mega Projects EPC and EPCM A L I A B D U L L A H A L - S A L E M 2 0 0 3 4 2 5 1 0 Outline Introduction Types of Contracts Contracting Strategies The Difference
STORAGE TANK SELECTION AND SIZING (ENGINEERING DESIGN GUIDELINE)
Page : 1 of 87 Rev: 02 Practical Engineering Guidelines for Processing Plant Solutions www.klmtechgroup.com Rev 01 Rev 02 June 2012 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 31 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 3 TYPES OF
Piping Hydraulic Line Design and Sizing Software KLM Technology Group
Piping Hydraulic Line Design and Sizing Software KLM Technology Group Practical Engineering Guidelines for Processing Plant Solutions #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia PIPING FLEXIBILITY ANALYSIS TABLE
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 23 Rev: 01 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 DEFINITIONS
T r a i n i n g S o l u t i o n s
T r a i n i n g S o l u t i o n s P R A CT I CA L E N G I NE E R I N G S O LU T IO NS KLM Technology Group is a technical consultancy group, providing specialized services, training and equipment to improve
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS
Project Procurement Management
Project Procurement Management Study Notes PMI, PMP, CAPM, PMBOK, PM Network and the PMI Registered Education Provider logo are registered marks of the Project Management Institute, Inc. Points to Note
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 38 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia CAUSTIC AND CHEMICAL TABLE OF CONTENT
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 24 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia S TABLE OF CONTENT SCOPE 2 DEFINITIONS
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 32 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE
GENERAL PROCESS PLANT COST ESTIMATING (ENGINEERING DESIGN GUIDELINE)
Page : 1 of 119 Rev 01 Guidelines for Processing Plant www.klmtechgroup.com Rev 01 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia (ENGINEERING DESIGN
To be used in conjunction with the Invitation to Tender for Consultancy template.
GUIDANCE NOTE Tendering for, choosing and managing a consultant Using this guidance This information is not intended to be prescriptive, but for guidance only. Appointing consultants for relatively small
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 13 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ELECTIRAL GROUNDING TABLE OF CONTENT
4 Tips and 3 Pitfalls to Avoid when Sourcing Professional Services
4 Tips and 3 Pitfalls to Avoid when Sourcing Professional Services a Little Planning can Save Companies Millions S a f e S o u r c i n g, I n c. 2 8 1 5 0 N. A l m a S c h o o l P k w y S u i t e 1 0 3
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 19 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
Supplier Management Exercises
Supplier Management Exercises Scenario: Recently, the Success Electric Company (SEC) has obtained enough capital to fund a marketing strategy. Now, SEC has decided to ask your project management consulting
Design-Bid-Build v. Guaranteed Maximum Price Contracting: The Basics for Owner's Counsel
Page 1 of 6 ALM Properties, Inc. Page printed from: New York Law Journal Back to Article Design-Bid-Build v. Guaranteed Maximum Price Contracting: The Basics for Owner's Counsel James E. Hughes New York
NEC Users Group Workshop Defined Cost
NEC Users Group Workshop Defined Cost [email protected]; July 2014 Turner & Townsend plc July 14 making the difference Introduction Practicalities in assessing of Defined Cost & Disallowed Cost Assumption
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 50 Project Engineering Standard www.klmtechgroup.com AUGUST 2011 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE
The programming, design
Understanding Project Delivery for the Design and Construction of Public Buildings architecture The programming, design and construction of important public buildings require the coordinated efforts of
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 13 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
DOCUMENT RESUME ED 420 986 EF 005 073 TITLE
DOCUMENT RESUME ED 420 986 EF 005 073 TITLE Construction Management Guidelines for Capital Outlay Program Projects. INSTITUTION Georgia State Dept. of Education, Atlanta. Facilities Services Unit. PUB
Delay, Disruption and Acceleration Costs
Project Services Pty Ltd Delay, Disruption and Acceleration Costs Patrick Weaver FAICD, MCIOB, PMP Introduction Delay and disruption costs are common in the construction and engineering industries and
COMPETITIVE TENDER 153/16 FOR PROVISION OF DIGITAL MARKETING SERVICES. Closing Date of Tender: 29 February 2016.
COMPETITIVE TENDER 153/16 FOR PROVISION OF DIGITAL MARKETING SERVICES Closing Date of Tender: 29 February 2016. 1 TELONE ZIMBABWE COMPETITIVE TENDER 153/16: PROVISION OF DIGITAL MARKETING SERVICES. 1.0
Competency-Based Organization For Project Management
Competency-Based Organization For Project Management Shekhar S. Patil, Ph.D. (USA) Abstract. Though the concept of organizational competence and competencies is well-established in the business and management
CHAPTER 3.0: PROCUREMENT AND CONTRACTING
CHAPTER 3.0: PROCUREMENT AND CONTRACTING This chapter outlines the requirements for using Federal funds to purchase materials, products, or services under the CDBG Entitlement program. Whether you are
PMP SAMPLE QUESTIONS BASED ON PMBOK 5TH EDITION
PMP SAMPLE QUESTIONS http://www.tutorialspoint.com/pmp-exams/pmp_sample_questions.htm Copyright tutorialspoint.com BASED ON PMBOK 5TH EDITION Here are 200 more objective type sample questions and their
Florida Division of Emergency Management ITB-DEM-14-15-023 Disaster Recovery Services Questions and Answers (ANSWERS IN BOLD)
Florida Division of Emergency Management ITB-DEM-14-15-023 Disaster Recovery Services Questions and Answers (ANSWERS IN BOLD) 1) How can the Division attempt to procure Disaster Recovery Services valued
Incentive Compensation Systems In Community Health Centers. Curt Degenfelder Managing Director [email protected]
Incentive Compensation Systems In Community Health Centers Curt Degenfelder Managing Director [email protected] 1 What are the components of successful health centers culture that support an
Pump Selection and Sizing (ENGINEERING DESIGN GUIDELINE)
Guidelines for Processing Plant Page : 1 of 51 Rev 01 Feb 2007 Rev 02 Feb 2009 Rev 03 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru. (ENGINEERING DESIGN GUIDELINE)
Land Acquisition and Development Finance Part IV
Land Acquisition and Development Finance Part IV In last month s Learn article, we discussed tying up the land and a more in depth formal due diligence process. This article will discuss Development financing.
Business Interruption Insurance. Module 1: The Basics of BI
Module 1: Introduction Business Interruption ( BI ) insurance and claims are built on a few basic principles and if these are well understood the mystery of the subject is resolved. This article is the
PROCUREMENT PRACTICES AT PUBLIC HOUSING AGENCIES
PROCUREMENT PRACTICES AT PUBLIC HOUSING AGENCIES Table of Contents Procurement Regulations and Agency 3 Procurement Policies and Procedures 3 Roles and Responsibilities 4 Board of Commissioners 4 Sample
Outsourcing. Definitions. Outsourcing Strategy. Potential Advantages of an Outsourced Service. Procurement Process
CIPS takes the view that the outsourcing of services to specialist providers can often lead to better quality of services and increased value for money. Purchasing and supply management professionals should
15.963 Management Accounting and Control Spring 2007
MIT OpenCourseWare http://ocw.mit.edu 15.963 Management Accounting and Control Spring 2007 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. 15.963 Managerial
[Project Name] NZTA Contract No. [Contract Number] Schedule of Prices
[Project Name] NZTA Contract No. [Contract Number] Schedule of Prices Schedule of Prices SP1
Impartiality must be maintained in selecting suppliers to fulfil Council s requirements.
Title: Type: Council Adopted: 17 December 2014 File No: SF/491 TRIM Reference: 14/35410 Attachments: Guidelines (TRIM: 14/38862) 1. Purpose The purpose of this policy is to provide principles, processes
PARSONS CORPORATION CORPORATE GOVERNANCE GUIDELINES
PARSONS CORPORATION CORPORATE GOVERNANCE GUIDELINES I. Board of Directors The business and affairs of the Corporation are managed under the direction of the Board of Directors. The Board represents the
Developing a Public-Private Partnership Framework: Policies and PPP Units
Note 4 May 2012 Developing a Public-Private Partnership Framework: Policies and PPP Units This note is the fourth in a series of notes on developing a comprehensive policy, legal, and institution framework
Overview 1) Grantee s procurement requirements must be in conformance with the appropriate applicable Federal, State, and local laws.
The award of Federal funds does not exempt the Grantee organization from compliance with State, and local requirements. When similar requirements exist at all levels, the rule of thumb is that the most
:: REQUEST FOR INFORMATION :: DEMOLITION SERVICES
:: REQUEST FOR INFORMATION :: DEMOLITION SERVICES 4200 Canal Street, Suite B New Orleans, LA 70119 PROPOSAL SUBMITTAL DEADLINE: Friday, June 15, 2012 @ 2:00pm NOTE: Proposal to be submitted in one (1)
CDO WORKFORCE INVESTMENT BOARD. REPLACES CDO Workforce Investment Board Procurement Policy, dated 9/30/05
CDO WORKFORCE INVESTMENT BOARD POLICY #07-03: Local Procurement of Goods and Services DATE: November 14, 2007 APPLIES TO: Use of WIA Title I-B funds REPLACES CDO Workforce Investment Board Procurement
Pricing Your Work (Overhead Recovery Review)
Pricing Your Work (Overhead Recovery Review) To accurately price your work, you need to be aware of three main factors: 1. The Estimate these costs are the direct costs of labor, equipment, materials,
Making the Most of Property
the High performance portfolio: Making the Most of Property Management Agreements SUMMARY Property management agreements create the framework for who does what, when, where, and for how much in the relationship
Schedule of Prices. Project Name Contract No. Contract Number
Schedule of Prices Project Name Contract No. Contract Number C3-LS-BP-Issue 2 SP Page 1 Printed 1 March 2011 >: 1. When preparing the schedule
PROJECT PROCUREMENT MANAGEMENT
12 PROJECT PROCUREMENT MANAGEMENT Project Procurement Management includes the processes required to acquire goods and services from outside the performing organization. For simplicity, goods and services,
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 26 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
CONSULTANT AGREEMENT. THIS CONSULTANT S AGREEMENT (the Agreement ) is effective this day of
CONSULTANT AGREEMENT THIS CONSULTANT S AGREEMENT (the Agreement ) is effective this day of, 2011, by and between the TOWN OF UNIVERSITY PARK (the Town ), a municipal corporation of the State of Maryland,
Are you ready to meet the challenges of the working world? Co-op can help
Marion Technical College Engineering Technologies Co-Operative Education Student Guide 2010-2011 Are you ready to meet the challenges of the working world? Co-op can help What is Co-operative Education?
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 32 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia INSTALLATION, FLUSHING AND TABLE OF
PPP Models. Ownership of capital assets Responsibility for investment Assumption of risks, and Duration of contract.
PPP Models The PPP models vary from short-term simple management contracts (with or without investment requirements) to long-term and very complex BOT form, to divestiture. These models vary mainly by:
Sri Lanka Accounting Standard -LKAS 11. Construction Contracts
Sri Lanka Accounting Standard -LKAS 11 Construction Contracts -405- Sri Lanka Accounting Standard -LKAS 11 Construction Contracts Sri Lanka Accounting Standard LKAS 11 Construction Contracts is set out
UOP Career Development. Career development program for mechanical and civil engineers
UOP Career Development Career development program for mechanical and civil engineers MAKING OUR WORLD SAFER AND MORE SECURE, MORE COMFORTABLE AND ENERGY EFFICIENT, AND MORE INNOVATIVE AND PRODUCTIVE Our
Fundamentals of a Construction Audit. August 7, 2014
Fundamentals of a Construction Audit August 7, 2014 Agenda Definitions Risk Based Approach What Determines Risk Fraud Construction Risks What to Audit Red Flags Why Audit Prevention Wrap-up 1 Definitions
Owner s project control review. 2014 Baker Tilly Virchow Krause, LLP
Owner s project control review 2014 Baker Tilly Virchow Krause, LLP About Baker Tilly > Established in 1931 > One of the top 20 largest accounting and advisory firms in the United States according to Accounting
THE USE OF OUTSIDE CONTRACTORS FOR PORT MAINTENANCE. John R. Lethbridge
Page 1 of 5 TRANSPORTATION, WATER AND URBAN DEVELOPMENT DEPARTMENT THE WORLD BANK November 1990 Transport No. PS-2 THE USE OF OUTSIDE CONTRACTORS FOR PORT MAINTENANCE John R. Lethbridge The use of outside
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 36 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 3 REFERENCES
CONCEPT AND BACKGROUND TO PUBLIC PRIVATE PARTNERSHIP (PPP) / PRIVATE FINANCE INITIATIVE (PFI) UK EXPERIENCE
CONCEPT AND BACKGROUND TO PUBLIC PRIVATE PARTNERSHIP (PPP) / PRIVATE FINANCE INITIATIVE (PFI) UK EXPERIENCE Professor Mustafa Alshawi 11/20/2009 Chairman Iraq Institute for Economic Reforms (IIER) Baghdad,
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
CONFINED SPACE ENTRY (PROJECT STANDARDS AND SPECIFICATIONS) KLM Technology Group
Page : 1 of 34 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENTS Purpose 2 Scope
CHAPTER 2 CONTRACT STRATEGY
CHAPTER 2 CONTRACT STRATEGY At the early stage of a project and once a project manager is selected, the main issue that faces the owner is to decide on the contract strategy that best suits the project
The Concept of Present Value
The Concept of Present Value If you could have $100 today or $100 next week which would you choose? Of course you would choose the $100 today. Why? Hopefully you said because you could invest it and make
Pensions Freedom. What do the pension changes really mean? This is for information purposes only.
Pensions Freedom What do the pension changes really mean? This is for information purposes only. Pensions Freedom March Budget 2014 introduced unprecedented changes to how pension benefits can be taken
Request for Proposal (RFP) 15003 Open-End Contract for Media Buying Service
Request for Proposal (RFP) 15003 Open-End Contract for Media Buying Service Section 1 Service Required The (Commission) is seeking proposals from advertising agencies or communication companies to work
CONSULTANT AGREEMENT. THIS CONSULTANT S AGREEMENT (the Agreement ) is effective this day of
CONSULTANT AGREEMENT THIS CONSULTANT S AGREEMENT (the Agreement ) is effective this day of, 2012, by and between the TOWN OF UNIVERSITY PARK (the Town ), a municipal corporation of the State of Maryland,
How to Write the Construction Management RFQ/RFP
2011-06-07 How to Write the Construction Management RFQ/RFP Setting Up a Project for Success Today's Objectives The Art of RFQ/RFP writing First things first Determining the optimum Project Delivery Method
Purchases from $750 $1,500 requires 3 Verbal Quotes. Purchases from $1,501 $24,999 requires 3 Written Quotes
Introduction A Guide for Contractors and Suppliers The Purchasing Office should be your first point of contact with the County. Our role is to bring together users and suppliers to ensure that the County
ECONOMIC JUSTIFICATION
ECONOMIC JUSTIFICATION A Manufacturing Engineer s Point of View M. Kevin Nelson, P.E. President Productioneering, Inc. www.roboautotech.com Contents: I. Justification methods a. Net Present Value (NPV)
Appendix 18 NEC3 Options
Appendix 18 NEC3 Options December 2007 Page 449 Appendix 18 NEC3 Options NEC3 Main Options There are six main options as set out below. The Contractor carries the greatest risk under options A and B, and
AKA Which Is? Used When? Who s Responsible?
Open Proprietary Descriptive Performance Reference Cash Allowance Closed Prescriptive Base Bid Specifications AKA Which Is? Used When? Who s Responsible? Several (3-5) appropriate material/product/systems
Sri Lanka Accounting Standard-LKAS 19. Employee Benefits
Sri Lanka Accounting Standard-LKAS 19 Employee Benefits CONTENTS paragraphs SRI LANKA ACCOUNTING STANDARD-LKAS 19 EMPLOYEE BENEFITS OBJECTIVE SCOPE 1 6 DEFINITIONS 7 SHORT-TERM EMPLOYEE BENEFITS 8 23 Recognition
DEMO Version. Owner and Contractor OCNMP103
Page 1 of 12 AGREEMENT made as of the in the year of (In words, indicate day, month and year) day of BETWEEN the Owner: (Name, address and other information) DEMO Version and the Contractor: (Name, address
Comparison of Design Bid Build and Design Build Finance Operate Maintain Project Delivery
Comparison of Design Bid Build and Design Build Finance Operate Maintain Project Delivery By Bob Prieto Design Bid Build (DBB) and Design Build Finance Operate Maintain (DBFOM) project delivery differ
The Role and Responsibilities of the Managing Partner Timothy I. Michel, CPA
The Role and Responsibilities of the Managing Partner Timothy I. Michel, CPA I became the managing partner (MP) in my prior firm after having spent 25 years serving clients as a practice partner. During
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 20 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
1.1 Introduction. Chapter 1: Feasibility Studies: An Overview
Chapter 1: Introduction 1.1 Introduction Every long term decision the firm makes is a capital budgeting decision whenever it changes the company s cash flows. Consider launching a new product. This involves
Goals of the Unit. spm - 2014 adolfo villafiorita - introduction to software project management
Project Pricing Goals of the Unit Understanding what are the main factors determining project and project outputs price Learn some strategies to determine price Understanding in more details the procurement
How to get value for money from service providers on major projects
How to get value for money from service providers on major projects Session Focus Contracting as a relationship Identifying win/win arrangements Procurement & Planning on major projects Understanding the
ARRANGEMENTS FOR THE FUTURE SUPPLY AND REIMBURSEMENT OF GENERIC MEDICINES FOR NHS SCOTLAND. Consultation Document
ARRANGEMENTS FOR THE FUTURE SUPPLY AND REIMBURSEMENT OF GENERIC MEDICINES FOR NHS SCOTLAND Consultation Document Scottish Executive Health Department October 2003 Arrangements For The Future Supply And
Alliance Contract Model - A Promising New Contracting Method
Alliance Contract Model - A Promising New Contracting Method Alliancing reflects a shift from more traditional procurement methods which focus on strict risk allocations, to a collaborative approach...
REQUEST FOR PROPOSAL TO PROVIDE CONSTRUCTION MANAGEMENT AND GENERAL CONTRACTOR SERVICES SPRINGVILLE CITY NEW AQUATICS AND ACTIVITIES CENTER
RFP #2016-02 REQUEST FOR PROPOSAL TO PROVIDE CONSTRUCTION MANAGEMENT AND GENERAL CONTRACTOR SERVICES FOR SPRINGVILLE CITY NEW AQUATICS AND ACTIVITIES CENTER RELEASE DATE: January 29, 2016 DUE DATE: February
REQUEST FOR QUOTATION Quote #30-452-1808 CAR WASH PUMP REPLACEMENT (This Is Not A Sealed Bid)
Purchasing Division 211 West Oakley Street Flint, Michigan 48503 Ph: 810.767.4920 Fax: 810.767.4405 Quotations will be received by the Purchasing Division of Genesee County Road Commission, until 1:45
1.040 Project Management
MIT OpenCourseWare http://ocw.mit.edu 1.040 Project Management Spring 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. Fred Moavenzadeh Spring 2009
Soya Micro-Enterprise
Africa Do Business Ltd (Uganda) Email: africadobusiness.com Website: www.africa-do-business.com Soya Micro-Enterprise Business Model with Soya Milk Making Machines Electric Blender Soya Bean Grinder and
Wrap ISA and Wrap Personal Portfolio 1/26
Wrap ISA and Wrap Personal Portfolio 1/26 Terms and conditions These terms govern your relationship with Standard Life Savings, a company authorised and regulated by the FCA which is part of the Standard
Understanding Depreciation, Fixed, and Variable Costs
Lesson D4 2 Understanding Depreciation, Fixed, and Variable Costs Unit D. Basic Agribusiness Principles and Skills Problem Area 4. Applying Basic Economic Principles in Agribusiness Lesson 2. Understanding
ADVERTISEMENT FOR BIDS
ADVERTISEMENT FOR BIDS Bids will be received at the office of the Niles City School District, 100 West Avenue, Niles, Ohio, 44446 until 12:00 PM on Friday, March 22, 2013 and will be opened and read immediately
Project Management. Sources of Funds
Project Management Sources of Funds After a grant award is made, the funds are received at the college in several different ways. Some agencies send lump sum portions of the entire award at intervals during
